|
11. SS6L | Temp., surface, Fast-response thermistor, BSL | BIOPAC - ...
|
|
on a variety of body locations. The SS6L is also appropriate for use in locations where temperature changes rapidly, as with the temperature changes of inspired/expired breath.
TAPE1 can be used to hold the SS6L in place.
Replacement sensor available: RX202A
Topics
Cleaning guidelines Transducer calibration using two values
|
|
|
|
12. SS4A | Pulse Plethysmogram, SS | BIOPAC - Research
|
|
pressure in specific body locations. Connect this transducer to a single TEL100C input channel to record a pulse pressure waveform. The ergonomic housing improves contact with the subject and reduces movement artifact. Attach it to a finger with the Velcro strap ortape it to other body locations.
See TSD200 for the MP150 or MP100 System equivalent.
Topics
Amplifier filter settings Cleaning guidelines Deep breath and PPG signal
|
|
|
|
13. SS6 | Temperature, Fast-response, SS | BIOPAC - Research
|
|
on a variety of body locations. The SS6 is also appropriate for use in locations where temperature changes rapidly, as with the temperature changes of inspired/expired breath.
Replacement sensor available: RX202A
TAPE1 can be used to hold the SS6 in place.
See TSD202A for the MP150 or MP100 System equivalent.
Topics
Amplifier filter settings Cleaning guidelines ECG Analysis Extracting heart rate from a noisy ECG
|
|
|
|
14. SS4A | Pulse Plethysmogram, SS | BIOPAC - Research
|
|
pressure in specific body locations. Connect this transducer to a single TEL100C input channel to record a pulse pressure waveform. The ergonomic housing improves contact with the subject and reduces movement artifact. Attach it to a finger with the Velcro strap ortape it to other body locations.
See TSD200 for the MP150 or MP100 System equivalent.
MRI Catalog AcqKnowledge Software Guide MP Systems Hardware Guide MP Research Catalog Product Citations: review publications summary or
|
|
|
|
15. SS4LA | Pulse Plethysmogram, BSL | BIOPAC - Higher Education
|
|
pressure in specific body locations. Connect this transducer to a single MP3X input channel to record a pulse pressure waveform. The ergonomic housing improves contact with the subject and reduces movement artifact.
Attach to a finger via the Velcro strap or tape to other body locations. Includes shielded 2-meter cable.
Topics
Cleaning guidelines Deep breath and PPG signal flattening NIBP100A and pulse plethysmography Transducer
|
|
|
|
16. SS6 | Temperature, Fast-response, SS | BIOPAC - Research
|
|
on a variety of body locations. The SS6 is also appropriate for use in locations where temperature changes rapidly, as with the temperature changes of inspired/expired breath.
Replacement sensor available: RX202A
TAPE1 can be used to hold the SS6 in place.
See TSD202A for the MP150 or MP100 System equivalent.
You might also be interested in the following items:
Item
Description
|
|
|
|
17. SS4LA | Pulse Plethysmogram, BSL | BIOPAC - Higher Education
|
|
pressure in specific body locations. Connect this transducer to a single MP3X input channel to record a pulse pressure waveform. The ergonomic housing improves contact with the subject and reduces movement artifact.
Attach to a finger via the Velcro strap or tape to other body locations. Includes shielded 2-meter cable.
You might also be interested in the following items:
Item
Description
|
|
|
|
18. SS6L | Temp., surface, Fast-response thermistor, BSL | BIOPAC - ...
|
|
on a variety of body locations. The SS6L is also appropriate for use in locations where temperature changes rapidly, as with the temperature changes of inspired/expired breath.
TAPE1 can be used to hold the SS6L in place.
Replacement sensor available: RX202A
You might also be interested in the following items:
Item
Description
RX202A Sensor for
|
|
|
|
19. SS4A | Pulse Plethysmogram, SS | BIOPAC - Research
|
|
pressure in specific body locations. Connect this transducer to a single TEL100C input channel to record a pulse pressure waveform. The ergonomic housing improves contact with the subject and reduces movement artifact. Attach it to a finger with the Velcro strap ortape it to other body locations.
See TSD200 for the MP150 or MP100 System equivalent.
You might also be interested in the following items:
Item
Description
|
|
|
|
20. Ordering Custom Wrought Iron Products from Steven Handelman Studios
|
|
are U.L. certified for Dry locations.
All wall sconces are rated 60w./socket 120v.
Wall sconces are made in wrought iron and/or with brass parts.
All brass parts are sandblasted to insure a good finish bond.
All wall sconces are priced without shades. Shades are priced
individually and one may order shades other than what is shown
in catalog pictures.
All wall sconce height measurements include shades or 3” light
bulbs in candle sconces.
|
|
|
Result page:
Previous
Next
|